Products

Terblend N 3154

Terblend® N 3154 is an 8% mineral filled ABS/PA blend with good dimensional stability and enhanced rigidity.

Key Features

  • High dimensional stability
  • Enhanced rigidity
  • Mineral filled (8%)

Applications

  • Housings of electrical devices
  • Grade Version
  • Properties

    Properties of Terblend N 3154

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Volume Rate, 240 °C/10 kg ISO 1133 cm³/10 min -
    Melt Volume Rate, 260 °C/5 kg ISO 1133 cm³/10 min 8
    Mechanical Properties
    Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 7
    Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 5
    Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 8
    Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 6
    Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 150
    Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 100
    Tensile Stress at Yield, 23 °C ISO 527 MPa 55
    Tensile Strain at Yield, 23 °C ISO 527 % 2.9
    Tensile Strain at Break, 23 °C ISO 527 % 35
    Tensile Modulus ISO 527 MPa 2700
    Elongation at Break (MD) ISO 527 % 35
    Flexural Strength, 23 °C ISO 178 MPa 80
    Flexural Modulus, 23 °C ISO 178 MPa 2500
    Thermal Properties
    Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 105
    Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h) ISO 306 °C 130
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 83
    Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 97
    Coefficient of Linear Thermal Expansion ISO 11359 10^(-6)/°C 80
    Electrical Properties
    Dissipation Factor (100 Hz) IEC 60250 10^(-4) 150
    Dissipation Factor (1 MHz) IEC 60250 10^(-4) 150
    Volume Resistivity IEC 60093 Ohm*m 1E13
    Surface Resistivity IEC 60093 Ohm 1E15
    Comparative Tracking Index IEC 60112 V 600
    Other Properties
    Density ISO 1183 kg/m³ 1110
    Water Absorption, Saturated at 23 °C ISO 62 % 3.9
    Filler Content (% Ash) % 8
    Processing
    Linear Mold Shrinkage ISO 294-4 % 0.6
    Melt Temperature Range ISO 294 °C 250 -285
    Mold Temperature Range ISO 294 °C 80
    Injection Velocity ISO 294 mm/s 40
    Drying Temperature °C 80
    Drying Time h 2 - 4

    Typical values for uncolored products

  • Processing

    Processing of Terblend N 3154

  • Safety Data Sheet